Ford Automobiles banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a 1968 ford F-350. It needs new I-Beams under the front end.
The King pins have been changed before. I don't know how to find out the size of the king pins so i can put some new I-Beams.
What i am wondering is will the complete front end off of a 67-71 ford F-250 Camper special work as a swap?
I currently have access to this parts truck and that would be great if it will work.

appreciate any help
 

·
Registered
Joined
·
6,973 Posts
Rock auto shows this King Pin set for the f-350 v-8
Washers IncludedYes
King Pin MaterialSteel
King Pin Length6.450 in.
King Pin Diameter1.054 in.
Bearing IncludedYes
Bushings IncludedYes
Alternate/OEM Part Number(s): 88911904
 

·
Registered
Joined
·
6,973 Posts
On your change over
Rock Auto shows different king pins according to size
But doesn't show I beams
It could work but I'd don't know for sure
 

·
Super Moderator
Joined
·
13,486 Posts
The front suspension for 75 to 92 E Series was the same for 3/4 and 1 ton applications/

Action
 

·
Super Moderator
Joined
·
13,486 Posts
I know that and a much older one too. For the era the E series and F series had the same front suspension.

Action
 

·
Super Moderator
Joined
·
13,486 Posts
I have access to pin data for 1973 to 1979 trucks
Pins come in 5 ODs
.85
.92
.93
1.05
1.23

To get data for the years that I do have
Need axle code or
axle GVW, drive type, cab type, steering type

Action
 
1 - 7 of 7 Posts
Top