Ford Automobiles banner

1 - 20 of 21 Posts

·
Super Moderator
Joined
·
1,015 Posts
Discussion Starter #1
I have 2 set of 351w E7 heads. 1 set fully complete ( 0 miles and fresh of crate engine) 2nd set needs rocker arms ( low miles and fairly fresh reman).

Complete multi-port fuel injection system for '88 351w Club Wagon. Wire harness, computer, lots of new sensors, EGR, and fuel injectors, everything !!

I have a C-6 beefed up trany, with heavy duty internals and shift kit. Built to take a beating and keep on ticking !!

Just ask me about it and I also have pic's upon request.
 

·
Registered
Joined
·
2,028 Posts
aren't the E7's what they put on the 5.0 HO? i remember rebuilding a pair a few months ago...
 

·
Super Moderator
Joined
·
1,015 Posts
Discussion Starter #7 (Edited)
Here are one set of heads I have. They are E7's and complete, 0 miles (just dino time) and freshly off my crate engine. They even come with fresh unused spark plugs.
Sorry, pic's where taken before I cleaned off the head gasket material.




Here is the C-6 with bell housing to fit a small block (351w) NOT BIG BLOCK. This tranny has about 8000 miles on rebuild and has every possible heavy duty part in it. Has a shift kit and new torq converter. This tranny was built by Certified Transmision Certified Transmission - Iowa Transmission Shops and has the "Road Ripper 3000" package for the details.



AS IS...NO WARRANTY ON ANY ITEM !!
I will get a picture of all the fuel injection stuff tonight and hope to post it later.
 

·
Registered
Joined
·
2,028 Posts
wait. is it roller cam?
 

·
Registered
Joined
·
4 Posts
I might be interested in the trans. Does it have a stall converter on it? i assume it is working and shifting good? What kind of price are you looking for it and what kinds of trades would you possibly be interested in?
 

·
Super Moderator
Joined
·
1,015 Posts
Discussion Starter #15 (Edited)
I might be interested in the trans. Does it have a stall converter on it? i assume it is working and shifting good? What kind of price are you looking for it and what kinds of trades would you possibly be interested in?
Sorry, no stall converter but stock yes. I was looking at $500.00 or best offer plus shipping. Just work with me on a fair price. The tranny works perfectly fine. Its been stored for about 4 years in doors. As for trading.....what do you have ? I am pretty open on this....just depends if I want it...sorry...can be almost anything.
 

·
Registered
Joined
·
4 Posts
i have a lot of small block ford stuff, so if there might be anything for one that you need... Also, do you happen to know the horsepower rating on the trans.?
 

·
Super Moderator
Joined
·
1,015 Posts
Discussion Starter #17
i have a lot of small block ford stuff, so if there might be anything for one that you need... Also, do you happen to know the horsepower rating on the trans.?
This is the info I can tell you, as for the H.P. I was told...like 800 H.P. But read the info they have posted and you deside. Certified Transmission - Road Ripper 3000 Transmission

What small block After Market stuff do you have ? I have a 302 roller cam engine that could use some goodies.
 

·
Registered
Joined
·
2,028 Posts
if it's for the 351W, you're looking around 650-700HP from what i'm seeing..
but it is a C6, so... i could see the 800:cornut:
 
1 - 20 of 21 Posts
Top