Ford Automobiles banner

1 - 7 of 7 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Hey , new to sight hope to get some InSite . I have a 68 4 door falcon with non roller 302 with c6 trans . Will at 86 roller with at t5 trans fit in this vehicle. Thanks for any response .
 

·
Super Moderator
Joined
·
12,940 Posts
Welcome to the FFO!

It will fit in the general sense of the word. And .....you will need new
Driveline
mounts
linkage
Modify the fuel system for high pressure fuel delivery
Radiator and hoses
That engine is fuel injected (first year for sequential) so you will want ALL of the electronic engine controls
Plus misc wiring

Your swap is not of a different engine family. And if it were this is always nice to have
The injected version is likely a little taller than the carb. Just a guess.

Action
 

·
Registered
Joined
·
11 Posts
Discussion Starter #4
Welcome to the FFO!

It will fit in the general sense of the word. And .....you will need new
Driveline
mounts
linkage
Modify the fuel system for high pressure fuel delivery
Radiator and hoses
That engine is fuel injected (first year for sequential) so you will want ALL of the electronic engine controls
Plus misc wiring

Your swap is not of a different engine family. And if it were this is always nice to have
The injected version is likely a little taller than the carb. Just a guess.

Action
Thanks . It's already converted to carb . I was more concerned about the length of front cover and water pump. I have an aluminum rad in it now so I'm concerned about distance to my rad. Thanks so much for the reply.
 

·
Registered
Joined
·
37 Posts
C6 - ? Maybe Swapped from P/U or other bigger Ford?
Four doors are getting respect more and more ,with a T5 it will be a wolf in sheep clothing...

T5 with selected rear gearing for your driving and you have a gear for every need'...

have fun

'61 Comet 258 cid Tri-Power Six / T5 / 3.80 8" rear.
'63 Falcon 'Moredoor Wagon' Modified '71 Maverick 170 cid Six / T5 / OEM 3.50 rear.
'74 Maverick 250 cid Six / Vortech Supercharger / T5 / OEM 8" rear.
'50 'Stovebolt' 216 cid babbit-beater Six Chevy DeLuxe.
'50 Ferguson TO 20 / Continental Z120 120 cid Four.
'77 Puch Maxi 49cc Class III 2 Hp Moped (W/Factory Hand Pinstriping )
projeccts, projects including '66 Ranchero 289 cid / C4 slushbox / 8" rear....
 

·
Registered
Joined
·
11 Posts
Discussion Starter #7
C6 - ? Maybe Swapped from P/U or other bigger Ford?
Four doors are getting respect more and more ,with a T5 it will be a wolf in sheep clothing...

T5 with selected rear gearing for your driving and you have a gear for every need'...

have fun

'61 Comet 258 cid Tri-Power Six / T5 / 3.80 8" rear.
'63 Falcon 'Moredoor Wagon' Modified '71 Maverick 170 cid Six / T5 / OEM 3.50 rear.
'74 Maverick 250 cid Six / Vortech Supercharger / T5 / OEM 8" rear.
'50 'Stovebolt' 216 cid babbit-beater Six Chevy DeLuxe.
'50 Ferguson TO 20 / Continental Z120 120 cid Four.
'77 Puch Maxi 49cc Class III 2 Hp Moped (W/Factory Hand Pinstriping )
projeccts, projects including '66 Ranchero 289 cid / C4 slushbox / 8" rear....
Ya it's has a 302 . I put the c6 in it because I was not sure about the pedal assembly. I put 9inch rear end out of an old bronco. 355 work good but would like the T5
 
1 - 7 of 7 Posts
Top