Ford Automobiles banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
my mountaineer needs new lower ball joints. the service manual says the whole control arm needs replaced. i looked at them and they look like the ball joints can be pressed out and new one pressed back in. has anyone worked on these? any help would be appreciated
 

·
Registered
Joined
·
1,184 Posts
There's a post a couple of days ago called LBJ. Everything you need is there.
 

·
Registered
Joined
·
2 Posts
if you set the truck on jack stands, placing the jack stands under the lower control arms (this keeps the front springs loaded) you can use a standard ball joint press set to change them. be safe:biggrin5:
 
1 - 3 of 3 Posts
Top