Ford Automobiles banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a '93 Ford Econoline E350 with a 351 motor. It was running fine, but now it won't start. I replaced the fuel filter and checked to make sure it is getting fuel. I replaced the control module and the coil. The engine turns over, has spark, has gas, but still won't start. Any ideas/advice?
 

·
Registered
Joined
·
4,352 Posts
My guess is that you have a dirty sticking IAC. But it could be a number of things, so I would look for vacuum leaks, consider pulling and cleaning the IAC, and pull diagnostic codes.


How to pull OBD1 codes in your drivewayhttp://www.fordforumsonline.com/for...nostic-codes-obd1-pre-1996-fords.html#post413

Howto locate a vacuum leak
http://www.fordforumsonline.com/forum/engine-drivetrain/94-howto-how-locate-vacuum-leak.html#post423
HowTo check your IAC
http://www.fordforumsonline.com/for...lean-your-idle-air-control-valve-iac-iab.html
 
1 - 2 of 2 Posts
Top