Ford Automobiles banner
1 - 1 of 1 Posts

·
Registered
Joined
·
96 Posts
On over head cam engines, (especially DOHC) getting the camshaft(s) aligned (synchronized) with the crank (also sometimes called "timing" the cam) can be a challenge. Many time special tools/jigs are required.

Make certain you have a shop manual and all of the necessary tools before you start your project !
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top