Ford Automobiles banner
1 - 9 of 9 Posts

·
Administrator
Phoenix, AZ 85008
Joined
·
16,300 Posts
Welcome to the FFO!

By the words you are using I am assuming you are NOT in the US.
Just not sure.
A US built Granada with a 2.3l and manual transmission would take this transmission clutch
https://www.ebay.com/itm/LuK-07-003-Clutch-Kit/352977758298?fits=Year:1982|Model:Granada|Engine+-+Liter_Display:2.3L|Make:Ford&hash=item522f1d285a:g:9BsAAOSwJLNeT9nh

This may not work for a European Granada

And I am also assuming not an AC compressor clutch or a fan clutch or some other clutch.

>>>>>>>>>>>>>>>Action
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Welcome to the FFO!

By the words you are using I am assuming you are NOT in the US.
Just not sure.
A US built Granada with a 2.3l and manual transmission would take this transmission clutch
https://www.ebay.com/itm/LuK-07-003-Clutch-Kit/352977758298?fits=Year:1982|Model:Granada|Engine+-+Liter_Display:2.3L|Make:Ford&hash=item522f1d285a:g:9BsAAOSwJLNeT9nh

This may not work for a European Granada

And I am also assuming not an AC compressor clutch.

>>>>>>>>>>>>>>>Action
Hi
Thanks for the reply! No, iam not in US. I am in Europe, and searching for european granada parts.
Is this forum only for the US ford cars?
 

·
Administrator
Phoenix, AZ 85008
Joined
·
16,300 Posts
There are many non-US users here.

Just did not know as you did not specify.
And Granada was built for the US and European markets.

Action
 

·
Administrator
Phoenix, AZ 85008
Joined
·
16,300 Posts
Any idea the diameter of the clutch?

>>>>Action
 

·
Administrator
Phoenix, AZ 85008
Joined
·
16,300 Posts

·
Administrator
Phoenix, AZ 85008
Joined
·
16,300 Posts
The one in the link is in the UK. Not exactly Europe but much closer than the US.
Their email is [email protected]
You might send them an email asking if that clutch fits.
If not then do they have one that works.

Action
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top