Ford Automobiles banner
1 - 1 of 1 Posts

·
Registered
Joined
·
534 Posts
Printman31, first, when you let water go into the block, you probably allowed water into the cylinders. water does not compress! What you should have done is not to force the crank over, but remove the spark plugs first, then close hood and crank engine. next, if you do think its gasket or head, do yourself a favor and have the heads checked for cracks especially if the engine was overheated, Why do the work twice?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top