Ford Automobiles banner
1 - 5 of 5 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
The drivers seat, doesn't raise or lower, the tilt, and front and back work fine fine. It seems the rear motor(there are 3), shows no action, I took a reading on the plug and got no voltage when moving the switch, but is there an easier way to tell if the switch is bad, thanks.
 

·
Registered
Joined
·
2,028 Posts
you might have to wait on a response that'll make sense from our residential mini van guys...(and girl)
 

·
Registered
Joined
·
659 Posts
Hey there Mrfreded,

I am attaching a wiring diagram for the power seat. It is all too possible that you have an open, broken or chaffed wire from one of the motors to the switch which could be why there is no power at those points.

I would start by checking the wiring from the height motors to the Driver's Seat Switch to see if there are any breaks.

For your reference Fuse 104 in the Battery Junction Box (in the Engine Compartment), is the fuse for the Driver's seat.

Hope this helps.
 

Attachments

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top