Ford Automobiles banner

1 - 2 of 2 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
Older van - 1983 - going to remove trim to do bodywork, (my first attempts) and need to remove it, I know the trim is "pinned" in, but is there adhesive also?

Best way to remove? all the trim is straight and clean and worth saving.

thx
Sal:skep:
 

·
Registered
Joined
·
154 Posts
IIRC, the trim is held on with nylon clips, about 1.5''x2'', there are quite a few behind there. The ends or end is bolted thru the body, at the ends on a pickup, the vans may be different. On the trucks, the ''bolt'' is near the ends. Once the nut is off the bolt, gently pry the stud out away from the body and slide the trim back a few inches and it will pop off of the clips. Rich
 
1 - 2 of 2 Posts
Top