Ford Automobiles banner
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a 95 windstar.

She is being very bad recently.

some mornings she starts and runs just fine. But when she's not running well: She takes several times of turning over to get on and stable enough to drive (She stalls when you put it in drive. Then the rpm jump all over the place and she lurches) When you are driving there is no power when you floor it. She just creeps along like an old lady with a walker. She does misfire during this as well.

She intermittently stalls when you are starting to go from a standstill. requiring 3 or 4 turn overs to finally get the rpm stable.

Sometimes when you are on the highway, she wont get to the highway speed. She starts to shutter a little when you try and misfires. and it feels like she loses power.

any ideas?
 

· Registered
Joined
·
4,353 Posts
If she is running that poorly, her self diagnsotic system will have stored diagnostic trouble codes. You may purchase a code scanner for about $50 OBDII compliant, or many auto parts stores and some shops will pull diagnostic codes for free. Lee Myles, AutoZone.

Get the codes and let us know we can help more with that info.
Also please post which engine you have, how many miles, and what maintenance ahve you done and when, plugs, fuel filter, etc
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top